ENDSUMMER26 at checkout. 2m and 3m lids ship with 1m base modules.
2m and 3m lids, 1m base modules
We are using up the end of current stock. We are out of 2m and 3m bases, so a full-length lid now slides into 1m base modules laid end to end. You will see a small join between the tops of the base side walls. The functionality is not affected at all.
The lid runs the full length in one piece. The only visible difference is a fine line where two base sections meet, at the top of the side wall — marked in orange above.
No driveway? No problem!
Your lockable, flush-fit aluminium channel set into the pavement, so you can run a charging cable from your house to a car parked at the kerb without leaving a trip hazard. Available in 2m and 3m lengths, EN1433 (D400) rated.
Flush-fit, cross-pavement, no trip hazard
What owners say
The future of home EV charging
"Without this gully it would not have been possible for me to own an EV. It is the difference between charging at 7p per KWh and 45-80p."
Mr Paolo Fiori — Feb 2025Very communicative
"This is a very robust gully, capable of accommodating my 18mm diameter cable. I was able to ask for technical details in advance of installation, which lasted less than 2 hours."
Alan Stinchcombe — Jun 2025Installed on time with zero hassle
"I have now been using it for a couple of weeks and it is a game changer. Installed on time with zero hassle. The whole thing looks very robust."
Dan Wood — Jun 2025Quality install and great comms
"Absolutely delighted with the quality of the install. Ian's communication was superb and the installation was super smooth."
PGZ — May 2025Simply a superb service
"Chargegully provided a superb service from start to completion and now I am able to charge my car at home. I would highly recommend."
William Sykes-Robertson — May 2025No trip hazard, and it looks good
"I wanted a practical solution to leaving my car plugged in across a pavement without creating a trip hazard, and looks good. The lockable Charge Gully meets these needs and more."
Andrew S — May 2024USA EV Gully Review
"It is well built and turned out to be easy to install. It looks great and solves concerns about EV Cable tripping hazards."
James S — Jun 2025Choose your length
Measure your pavement width so you know which length to order. Your contractor cuts the channel to the exact pavement width on the day using a disc cutter.
2M2m Lockable Charge Gully EV Charging Channel
EN1433 (D400) rated. Supplied as a complete channel with lid, key and fixings.
3M3m Lockable Charge Gully EV Charging Channel
EN1433 (D400) rated. For wider pavements and longer runs to the charge point.
The features that matter(These pictures show the V1 channel, we will ship you the brand new V2 channel - shown above).
Self-closing lid, locked with a key
The ribbed lid closes itself behind the cable and locks, so the channel stays shut when you are not charging.
Takes any cable up to 18 mm
Wide enough for 7 kW and 22 kW charging cables. Drop the cable in, walk it to the car, and lock the lid behind it.
Set into the pavement, EN1433 (D400) rated
Recessed level with the surface and designed against BS EN 124 and the DfT's Inclusive Mobility guidance, so the pavement stays clear for everyone.
Three easy steps to get your Charge Gully installed:
Download our install instructions and product datasheet
Read them carefully (download install instructions and datasheet) and then find a qualified local installer
Order your Charge Gully and organise your local installer
You'll need to accept our terms and conditions of sale before purchase and take liability for any cable trips
Save £25 every time you charge your car!
The average UK drive saves £1,100 a year compared to public charging so you'll typically break even within one year!
Before you order
Three things to have in place. If you are unsure about any of them, contact us before you buy and we will talk it through.
Permission from the landowner
You'll need permission from whoever owns the pavement, normally your local authority, before installation.
A qualified local installer
Installation takes less than two hours. Your installer should work to our install instructions and reinstate the pavement to the relevant highways specification.
Pavement width measurement
Measure the pavement width so you know whether to order the 2m or 3m channel. Your contractor then cuts it to the exact pavement width on the day.
Frequently asked questions
Yes. You'll need permission from whoever owns the pavement, which is normally your local authority, before installation goes ahead.
Less than two hours. Your installer cuts the channel into the pavement, beds the gully in, and reinstates the surface around it.
A qualified local installer of your choosing, working to our install instructions. Reinstatement should follow the Specification for the Reinstatement of Openings in Highways (4th Edition) and its Electric Vehicle addendum.
Any charging cable up to 18 mm in diameter, covering both 7 kW and 22 kW charging.
The channel sits flush with the pavement surface with a ribbed, self-closing lid, and is designed against BS EN 124 and the Department for Transport's Inclusive Mobility — A Guide to Best Practice. Nothing is left across the pavement when you are charging.
You are. Before purchase you'll need to accept our terms and conditions of sale, which include taking liability for any cable trips.
Marine-grade 6063 T6 anodised aluminium, extruded and made in Britain. Full dimensions and load ratings are in the datasheet.
Ready to order your Charge Gully?
Pick your length and place your order, and we will confirm a delivery date.