The lowest cost way for housebuilders to satisfy Part S

Kerbo Charge is an award winning through-pavement channel that residents use to charge their EVs at home.
We are the lowest cost way for you to be Part S compliant for new homes without driveways.
You will save around £800 per install compared with buried armoured cables and pedestal chargers, and won't be hit by cars.

Book an intro call Download data sheet

Kerbo Charge through-pavement channel on a residential street

Proudly installed at developments by

The most cost efficient way to install home chargers on new build houses

Car charging from a Kerbo Charge channel

Slim and shallow cable channel, installed in one hour

Contour flexing design

The Kerbo Charge channel can flex during fitting to remain flush with the surface of uneven or cambered pavements.

One hour installation time

The channel is 32mm deep which means highways engineers only need to cut into the top tarmac layer. No additional foundation or footings are required - the unit is sealed in place with HAPAS approved mortar.

Self closing lid of the Kerbo Charge channel

Patented self closing lid design

Self closing lid to eliminate trip hazards

The Kerbo Charge lid snaps down shut behind the charging cable as it is inserted and removed. There are no magnets, springs or other serviceable parts.

UV stable with >25 year expectancy

The main body of the channel is made from polyvinyl chloride (PVC) - a high-strength thermoplastic, and the same material used in many modern pavement utility covers.

Low carbon and 100% recyclable

Typically only 2-4 kg of CO2 to produce 1 kg, and 100% recyclable via our closed loop recycling system.

Completed Kerbo Charge installation across a pavement

Safe for all foot and vehicle traffic

Tested by BSI to EN 1433 (C250)

BSI tested to C250 - our product will withstand up to 3,600 kN/m2 pressure, over triple the highest truck tyre pressure. They also confirmed it meets the requirements for water tightness and durability set for public drainage channels.

Slip tested to EN 16165

Wet PTV test value of 52, exceeding minimum requirement of 36.

10-year product warranty

Designed in London, made in Britain

UKCA & CE certified

Book a call

It's time for a smarter and more affordable approach for housebuilders

The current approach: buried armoured cable and pedestal charger

Complex, expensive and inefficient.
Coordination issues between trades on site.
Pedestal charger vulnerable to damage from cars.

The new approach: Kerbo Charge cross-pavement channel

Potential savings of over £800 per home vs pedestal solutions.
Trusted by 55+ Local Authorities — more than any other cross-pavement charging solution.
Kerbo Charge reduces street clutter without compromising traditional design.

Get Info Pack